| Size classSize class of the display as declared by the manufacturer. Often this is the rounded value of the actual size of the diagonal in inches. |
33.94 in (inches) |
| DiagonalApproximate diagonal size of the display. If the manufacturer does not provide such information, the diagonal is calculated from the width and height of the screen. |
863 mm (millimeters)
86.3 cm (centimeters)
33.9764 in (inches)
2.8314 ft (feet) |
| WidthApproximate width of the display. If the manufacturer does not provide such information, the width is calculated from the diagonal and the aspect ratio. |
795.33 mm (millimeters)
79.533 cm (centimeters)
31.3122 in (inches)
2.6094 ft (feet) |
| HeightApproximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio. |
332.93 mm (millimeters)
33.293 cm (centimeters)
13.1075 in (inches)
1.0923 ft (feet) |
| Radius of curvatureThere are curved displays, whose curve is part of a circumference (arc). In order to give more precise information about the curve of the screen, often the manufacturer provides data about the radius of this circumference. The smaller the radius, the larger the screen curve. |
800 mm (millimeters)
80 cm (centimeters)
31.4961 in (inches)
2.6247 ft (feet) |
| Panel manufacturerName of the manufacturer of the display panel. |
LG Display |
| Panel typeThere are various panel technologies. Each has its own specific features – viewing angles, color reproduction, response time, brightness/contrast, production cost, etc. The image quality depends directly on the type of the display panel used. |
OLED |
| Panel bit depthThe most widely used panels are those with 6, 8, and 10 bits for each of the RGB components of the pixel. They provide 18-, 24-, and 30-bit color, respectively. |
10 bits |
| FRCFrame Rate Control (FRC) is a method, which allows the pixels to show more color tones. With quick cyclic switching between different color tones, an illusion for a new intermediate color tone is created. For example, by using FRC, a 6-bit display panel is able to show 16.7 millioin colors, which are typical for 8-bit display panels, and not the standard 262200 colors, instead. There are different FRC algorithms. |
No |
| ColorsThe maximum number of colors, which the display is able to reproduce, depends on the type of the panel in use and color enhancing technologies like FRC. |
1073741824 colors
30 bits |
| Aspect ratioThe ratio between the horizontal and the vertical side of the display. Some of the standard and widely used aspect ratios are 4:3, 5:4, 16:9 and 16:10. |
2.389:1 |
| ResolutionInformation about the number of pixels on the horizontal and vertical side of the screen. A higher resolution allows the display of a more detailed and of higher quality image. |
3440 x 1440 pixels |
| Pixel pitchThe pixel pitch shows the distance from the centers of two neighboring pixels. In displays, which have a native resolution (the TFT ones, for example), the pixel pitch depends on the resolution and the size of the screen. |
0.232 mm (millimeters)
0.0232 cm (centimeters)
0.0091 in (inches)
0.0008 ft (feet) |
| Pixel densityInformation of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases. |
110 ppi (pixels per inch)
43 ppcm (pixels per centimeter) |
| sRGBsRGB is a color space, developed jointly by Hewlett-Packard and Microsoft in 1996. It is used in different devices such as printers, displays, TV sets, cameras, etc. The sRGB color space covers about 72% of the NTSC color space. |
135 % (percent) |
| DCI P3DCI P3 is a color space, introduced in 2007 by the SMPTE. It is used in digital cinema and has a much wider gamut than the sRGB. |
99 % (percent) |
| BrightnessInformation about the brightness of the screen. It is measured in candela per square metre (cd/m²). |
250 cd/m² (candela per square meter) |
| Peak brightnessOften even a higher peak luminance can be achieved under certain conditions. For example, when a smaller area/APL of the display is used for showing a bright object, when a bright object is displayed for a short time, etc. |
1300 cd/m² (candela per square meter) |
| Static contrastThe static contrast shows the ratio between the brightest and the darkest color, which the display can reproduce simultaneously, for example, within one and the same frame/scene. |
1500000 : 1 |
| HDRHDR expands the contrast ratio (peak luminance and minimal black levels) and color palette to achieve more details across the whole image – from the darkest parts to the brightest ones, which results in more realistic and life-like image. |
HDR10
DisplayHDR 400 True Black |
| Horizontal viewing angleInformation about the maximum horizontal viewing angle, within which the image on the screen is of acceptable quality. |
178 ° (degrees) |
| Vertical viewing angleInformation about the maximum vertical viewing angle, within which the image on the screen is of acceptable quality. |
178 ° (degrees) |
| Minimum response timeInformation about the minimum amount of time, in which the pixels change from one color to another. Very often the manufacturer provides the response time for transition from grey-to-grey (G2G). |
0.03 ms (milliseconds)
0.0000 s (seconds) |
| Maximum response timeInformation about the maximum amount of time, in which the pixels change from one color to another. |
1.1 ms (milliseconds)
0.0011 s (seconds) |
| Input lagDesktop monitors and smart TVs experience a latency/lag in visualizing the information. The time in milliseconds that the display needs to visualize the signal input. |
2.7 ms (milliseconds)
0.0027 s (seconds) |
| CoatingInformation about the type of coating of the display. There are different types of matte and glossy coatings, each of which has its own advantages and drawbacks. |
Anti-glare/Matte |
